Calcium Fluoride Centrifugal Spray Dryer

Application Client：

Project Classification：Chemical engineering industry

Dryer Type：LPG Series High Speed Centrifugal Spray Dryer

Project Description：Under the action of the pump, the original solution with a 11-12% solids content is fed continuously into the "centrifugal spray tower" and evaporates quickly. Most of the products are discharged from the bottom of the tower through the discharge valve, and the remaining products  enter into the cyclone separator and then to be separated out. Under the effect of high negative pressure, the high temperature exhaust gas enters into "dust removal tower", and the gas is discharged into the atmosphere by the high pressure air blower.

Overview:

 Under the action of the pump, the original solution with a 11-12% solids content is fed continuously into the "centrifugal spray tower" and evaporates quickly. Most of the products are discharged from the bottom of the tower through the discharge valve, and the remaining products  enter into the cyclone separator and then to be separated out. Under the effect of high negative pressure, the high temperature exhaust gas enters into "dust removal tower", and the gas is discharged into the atmosphere by the high pressure air blower. So as to complete the whole process. The calcium chloride content of products is more than 98%.

The process makes the material continuous evaporation in the atomization state, which can solve the serious material-pollution problem of the current conventional production process that to concentrate in iron container,but also can solve the serious corrosion problem of equipment, essentially improve the product quality.

Features:

1) Special air distribution structure design, can not only make a very good material fluidification, but also can discharge the large particles or caking materials;

2) Since the gas temperature at the outlet is generally lower than the maximum temperature of the product, it has a high thermal efficiency;

3) Device can meet the requirements of industrial automation system;

4) The drying process is designed to meet the environmental protection requirements and reduce material losses. Dry tail gas is discharged after the treatment of environmental protection equipment, ensure the cleanliness of the exhaust into the atmosphere.

5) Complete set of equipment operation is simple and flexible, even if the feed quantity and moisture have fluctuation, the system can still ensure stable operation;

6) Easy to operate, simple maintenance, long service life.