Aluminum Hydroxide Rotary Drum Dryer Project

Application Client：

Project Classification：Chemical engineering industry    

Dryer Type：HZG Series Single Rotary Drum Dryer Project

Project Description：Aluminum Hydroxide HZG Rotary Drum Dryer is a drying equipment with a high degree of mechanization, smaller resistance when the fluid pass through the cylinder,  lower energy consumption, better adaptability to the materials.

The Summary of Aluminum Hydroxide Rotary Drum Dryer:

Aluminum Hydroxide HZG Rotary Drum Dryer is a drying equipment with a high degree of mechanization, smaller resistance when the fluid pass through the cylinder,  lower energy consumption, better adaptability to the materials.

The wet material is input from one end of the cylinder, under the turning action of evenly distributed stir plates inside the tube, the material is uniformly distributed and dispersed in the dryer, and fully contact with the counter-current or co-current hot air to speed up the driving force of drying heat transfer and mass transfer. During the drying process, under the turning action of stir plates with a certain angle and the cylinder, the material is moved to the other end of the cylinder and to realize rapid and continuous discharging. After the separation of the cyclone, the tail gas is discharged through the exhaust fan.

Material Drying Requirements and Other:

1. Material Name: Aluminum Hydroxide

2. Initial Moisture: 5%-7%

3. Final Moisture: 0.2%

4. Making Material: 304 stainless steel in the place where the material is passing.

5. Cylinder Speed: 1 ~ 8 R / min, stepless speed regulation

6. Heating Mode: 200 degrees of superheated steam

Type Selection and Main Technical Parameters of Drying Machine:

According to the above material drying requirements, we can choose the HZG rotary drum dryer for continuous production.