+86-519-85257375

YPG Series Pressure Type Spray (Congeal) Dryer

YPG Series Pressure Type Spray (Congeal) Dryer

The YPG Series Pressure Type Spray (Congeal) Dryer has a device that can function drying and granulating together. The spraying pressure, spraying fl¬ow, and the size of spray nozzle of the liquid material ¬pump can be adjusted according to the requirements and the specific size of granule balls can be achieved.

Detail

YPG Series Pressure Spray (cooling) DryerDESCRIPTION

  The YPG Series Pressure Type Spray (Congeal) Dryer has a device that can function drying and granulating together. The spraying pressure, spraying fl­ow, and the size of spray nozzle of the liquid material ­pump can be adjusted according to the requirements and the specific size of granule balls can be achieved.

 

WORKING PRINCIPLE
  The liquid or paste raw material is sprayed into small liquid drop by pressed sprayer draw assistance from pressure of diaphram pump, and quickly drying through amply heat exchange (10-90sec.). Most of the powder granules are collected from outlet of discharge at the bottom of the dryer. The wasted air and fine powder are separated by the cyclone, the wasted air is exhaust from draft fan, and fine powder is collected at the bottom of cyclone. There is a second grade duster equipped at the outlet; therefore, the recovery rate of the finished powder granule can be 96% to 98%.

 
FEATURES

  1.Rapid drying speed. The surface area of the material will be enlarged greatly when liquid raw material is atomized and 95% - 98% of water can be evaporated instantly in the hot airflow. The drying time only need to take several seconds. This dryer is especially suitable for heating sensitive material.

  2.The finished product is ball granule with uniform size. Its fluidity and solubility are good. The quality and purity of the product is very high.

  3.Depend on the characteristics of raw material, the dryer can use hot air to dry or use cool air to granulate.

  4.Simple and stable operation. The control system is convenient which is easy to realize automatic operation.


APPLICATION

Chemical industry: 

Sodium Fluoride (Potassium ), Alkaline Dyestuff And Pigment, Dyestuff Intermediate, Mn3o4, Compound Fertilizer, Formic Silicic Acid, Catalyst, Sulphuric Acid Agent, Amino Acid, White Carbon, and etc. 

 

Food Industry: 

Fatty Milk Powder, Protein, Cocoa Milk Powder, Subsitute Milk Powder, Egg White (Yolk), Food And Plant, Oats, Chicken Juice, Coffee, Instant Dissoluble Tea ,Seasoning Meat, Protein ,Soybean, Peanut Protein, Hydrolysate, Sugar, Corn Syrup, Corn Starch, Glucose, Pectin, Malt Sugar,  Sorbic Acid Potassium, and etc. 

Pharmaceutical Industry: 

Chinese Traditional Medicines, Pesticide, Antibiotic, Medical Drinking Agent, and etc. 

Plastics and Resin: 

AB, ABS Emulsion, Uric Acid Resin, Phenolic Aldehyde Resin, Urea-Formaldehyde Resin, Formaldehyde Resin, Polythene, Poly-Chloroprene, And etc. 


Detergent: 

Common Washing Powder, Advanced Washing Powder, Soap Powder, Soda Ash, Emulsifier, Brightening Agent, Orthophosphoric Acid, and etc. 

Ceramic: 

Aluminium Oxide, Ceramic Tile Material, Magnesium Oxide, Talcum, and etc. 

Other: Calmogastrin, Hime Chloride , Stearic Acid Agent, and etc. 

 

TECHNICAL PARAMETERS

    Model

Item

Unit

50

100

150

200

300

500

1000

Max. Evaporation Capacity
  (kg/h)

kg

50

100

150

200

300

500

1000

Overall Dimension
  (Φ×H)

mm

1600× 
  8900

2000× 
  11500

2400× 13500

2800× 
  14800

3200× 
  15400

3800× 
  1880

4600× 
  22500

The Pressure of High-pressure 
  Pump

Mpa

2~10

Power

KW

8.5

14

22

24

30

82

30

Inlet Air 
  Temperature

oC

140~350

Moisture Content of Finished Product

%

<5( can be reached to 0.5)

Material Recovery Rate

%

>97

Electric Heater

KW

75

120

150

temperature is lower than 200,the 
  parameters should be calculated

Eelectricity 
  + Steam

Mpa+KW

0.5+54

0.6+90

0.6+108

according to the practical condition

Hot Air Furnace

Kcal/h

100000

150000

200000

300000

400000

500000

1200000

 

PRODUCTION FLOWCHART                

 

SCHEMATIC STRUCTURE

 

TYPICAL PROJECTS